Skip to content

PTFE / Flex | 14g | 25mm (1 Inch)

Pitter Patter Pregnancy Belly Bar

Colour: Indigo Blue

In stock - Dispatched within 1-2 business days


Colour: Indigo Blue

Product information


Yes, we accept returns, even for change of mind. Our items are hygienically dispatched to you in heat sealed plastic sleeves. Please inspect your jewellery prior to opening the sealed sleeve. Due to hygiene reasons we can not accept returns for 'sizing' or 'change of mind' once the plastic sleeve has been tampered. All returns must be requested within 14 days of receipt.

Worldwide Delivery

FREE delivery applies Australia wide for orders over $50. Free delivery applies for all international orders over $150.

We offer express post options for urgent orders. All orders are typically fulfilled within 1-2 business days. We dispatch at Tweed Heads Post Office, a Gold Coast Metro facility with a fast reliable turn around. Read more about our delivery and return policies on our FAQ page.

Australian Delivery Options - $7.99 or free for orders over $50

  • Standard Mail: 3-7 Business days
  • Priority Post: 2-4 Business days (the queue jumper)
  • Express Post: 1-2 Business Days (free express post for orders over $150)

New Zealand Delivery Options - From $15 for orders up to $20, $10 for orders over $20 and FREE for orders over $60.

  • Economy Mail: 5-15 Business days (suspended service from 27th June)
  • Registered Mail: 5-10 Business days
  • International Express: 2-5 Business days

US, UK and Rest of WorldFrom $25 for orders under $20, $18 for orders over $20, $12 for orders over $100. Free for orders over $150.

  • International Mail: 8-20 Business days (depending on location, typically around 8-12 business days)
  • International Express Post: 3-8 Business Days

When cleaning this type of material do NOT use alcohol or any chemical based cleaning agents as these will crack and damage your jewellery. Simply rinse in warm water with a generic disinfectant hand soap.

TIP: Try to avoid over screwing any PTFE balls as making these too tight can cause them to break or crack.

How to Size PTFE Wire Belly Rings

The best thing about PTFE wire belly bars is that they are easily resized to a desired length. To adjust, use a pair of scissors and cut the bar on a slight angle at the required length. Using a surgical steel ball, screw it on to the newly cut edge with firm pressure and the PTFE bar will re-thread itself. If you wish to fit your wire with a PTFE ball instead of a surgical steel one you can swap it back over once the thread has been created.

Also Available in Other Material(s)

Product Description

This super cute maternity belly button bar is for the expecting mother, it is a cleverly designed belly ring featuring a delicious little set of baby feet in either pink or blue, fastened to a clear Bio flex bar. The length of the PTFE piercing shaft (bar length ball to ball) is 1 inch (25mm).

This belly ring is comprised of surgical grade PTFE / Flex with 5mm surgical steel balls at both the top and bottom of the flexi bar. Comfortable and lightweight.

TIP: The piece is a fantastic item for baby announcement photos or gatherings. Available in your choice of blue or pink for 'boy or girl announcements'.

Fully adjustable! You may optionally reduce the size of your maternity belly ring as they are self threading. Simply cut the PTFE bar at a slight angle with a pair of scissors at the desired length. Repeatedly screw the ball back on as required until a firm threading takes. For further assistance feel free to contact any of our friendly staff.

    See below for full body jewellery specs:

    Piercing Post: Barbell (straight)

    Fastening Mechanism: Externally Threaded

    Gauge(s): 14g

    Piercing Post Length(s): 25mm (1 Inch)

    Body Jewellery Length: 50 mm

    Body Jewellery Width: 10 mm

    Piercing Compatibility:

    • Navel
    Warranty, Faults & Returns

    Warranty: 48 Days Warranty

    Change of Mind: We accept returns for 'change of mind' within 14 days of receipt where the item is unworn, unopened and in its original heat sealed sleeve packaging. Postage is non-refundable.

    Damaged Goods: You may be requested to mail the jewellery back to us. On some occassions we accept photographic evidence of broken goods saving you the hassle of going to the post office. We encourage you to email us first for next steps. If available, we will issue you a replacement at no additional cost. If the item is no longer in stock and we are unable to replace it, we will offer you either a full refund or if you prefer, an exchange to something of similar value.

    Jewellery Composition

    Piercing Post Material: PTFE / Flex

    Charm Material(s): Acrylic

    Gemstone(s): Acrylic

    Material Tips

    Please refer to the jewellery composition above.

    316L Surgical Steel, Titanium, PTFE, 925 Silver and solid gold (14K or 18K) are all suitable for water exposure and permanent wear.

    View our comprehensive material guide here for more information.

    How to wear: Maternity Belly Rings

    Pregnancy belly rings are preferable when your navel starts to stretch or pop, this typically occurs around the middle of the second trimester. The PTFE material used for maternity jewellery is totally flexible which makes it very comfortable during pregnancy and also assists to prevent any snagging or pinching. Additionally, these choices can also be selected with 100% PTFE materials (no steel) so that you may wear the jewellery during scans and in some instances also during surgery.

    As your baby grows larger you'll start to notice that the standard sizes no longer fit, rather than removing your jewellery and risking your piercing to close over, pregnancy belly rings can be used instead so that you can resume wearing navel rings again post pregnancy.

    We recommend the 1 inch length during the 5-7 month mark and some mums may find they need an even longer length in the later part of their pregnancy.

    • Step 1: Use a disinfectant hand soap to wash your hands, your navel piercing, and your belly ring.
    • Step 2: Simply unscrew the top ball of your belly ring and insert the belly bar shaft through the pierced opening within your navel cavity. Take care not to graze or poke your piercing, take your time to ensure the belly ring gently moves through the piercing until you see it surface at the top of your belly button.
    • Step 3: Screw on the top ball, to prevent losing your ball, ensure that the ball is reasonably tight however take care not to over tighten as this could make it difficult to loosen when you next remove the navel jewellery.

    Optional: Sizing your belly ring

    The best thing about PTFE belly bars (aside from the comfort) is that they are easily resized to a desired length. To adjust, use a pair of scissors and cut the bar on a slight angle at the required length. Using a surgical steel ball, screw it on to the newly cut edge with firm pressure and the PTFE bar will re-thread itself. You can then replace the steel ball with a plastic ball if desired.

    5* REVIEWS

    We aim for high customer satisfaction! Don't believe it? See for yourself.

    Google Reviews | Shopper Pics


    CHOOSE your free belly ring with every order and build up your body jewellery collection fast.

    More info here


    Absolutely! Discounts are added automatically and include both postage and bulk buy savings.

    Value Packs | Bulk Buys


    Free postage for all orders over $50 Australia Wide and over $150 World Wide.

    Want it fast? Yes, Express Post!


    Your cart is currently empty.

    Start Shopping

    Select options